miten kaksi näyttöä eri kuvilla?

[dude67]

[jankky]

Olen asentanut viimeisimmät ajurit. Atin contror centter o edelleenkin jossakin muualla kuin koneella.

[Lasse]

Noi aiempiin viesteihisi liittämäsi komennot päätyivät virheilmoitukseen koska olit antanut ne tavallisena käyttäjänä. Kuten dude67 aiemmin mainitsi niin komentoikkunassa pääsee pääkäyttäjätilaan antamalla komennon "su" ja salasanakyselyyn rootin salasanan.
Joskus käy niin että ohjelmasta ei tule valikkoon mitään mainintaa vaikka se olisikin asennettu. Katso hakemistosta /usr/bin onko siellä tiedosto nimellä amdcccle, jos on niin voit käynnistää sen "Suorita komento" ikkunasta. Jos käytössä on KDE niin ohjelma käynnistyy pääkäyttäjätilaan komennolla
kdesu amdcccle
Gnomessa komento lienee (korjatkaa Gnomen käyttäjät jos olen väärässä)
gnomesu amdcccle
Jos /usr/bin hakemistosta ei löydy tuota tiedostoa niin luultavasti paketti fglrx-control-center on asentamatta.

[Wally]

[jankky]

tuolta /user/bin kansiosta löytyy tuo amdcccle ohjelma. avaamisessa ilmenee kuitenkin ongelma: "Catalyst Control Center Linux Edition alustamisessa ilmeni ongelmia. Seuraavassa on mainittu muutamia mahdollisia syitä.

ATI_grafiikkaohjain ei ole asennettu tai ATI-ohjain ei toimi oikein.
Asenna ATI-laitteistoosi soveltuva ATI-ohjain tai määritä se acticonfigin avulla."

Päätteellä:
[root@Mustonen perhe]# gnomesu amdcccle
bash: gnomesu: command not found
[root@Mustonen perhe]# amdcccle
Session management error: Authentication Rejected, reason : None of the authentication protocols specified are supported and host-based authentication failed
[root@Mustonen perhe]#

Mitäs ny tehään?

[Wally]

[Anssi]

[jankky]

[Anssi]

[jankky]

Koneessa o Ati radeon 9200, mutta listal o 9250 and earlier - - - lähin todellisuutta?

Koodit:
[root@Mustonen perhe]# dkms status
fglrx-hd2000, 8.41.7-3mdv2008.0: added
fglrx-hd2000, 8.41.7-3mdv2008.0, 2.6.22.9-desktop-1mdv, i586: installed
fglrx-hd2000, 8.41.7-3mdv2008.0: added
fglrx-hd2000, 8.41.7-3mdv2008.0, 2.6.22.12-desktop-1mdv, i586: installed
fglrx-hd2000, 8.41.7-3mdv2008.0, 2.6.22.18-desktop-1mdv, i586: installed
fglrx-hd2000, 8.41.7-3mdv2008.0: added
hsfmodem, 7.60.00.09, 2.6.22.9-desktop-1mdv, i586: installed (original_module exists)
hsfmodem, 7.60.00.09, 2.6.22.12-desktop-1mdv, i586: installed (original_module exists)
hsfmodem, 7.60.00.09, 2.6.22.18-desktop-1mdv, i586: installed (original_module exists)
dkms.conf: Error! No 'BUILT_MODULE_NAME' directive specified for record #0.
vboxvfs, 1.5.0-6mdv2008.0, 2.6.22.9-desktop-1mdv, i586: installed (WARNING! Missing some built modules!)
vboxvfs, 1.5.0-6mdv2008.0: added
dkms.conf: Error! No 'BUILT_MODULE_NAME' directive specified for record #0.
vboxvfs, 1.5.0-6mdv2008.0, 2.6.22.12-desktop-1mdv, i586: installed (WARNING! Missing some built modules!)
fglrx, 8.40.4-7mdv2008.0: added
fglrx, 8.40.4-7mdv2008.0, 2.6.22.9-desktop-1mdv, i586: installed
fglrx, 8.40.4-7mdv2008.0: added
fglrx, 8.40.4-7mdv2008.0, 2.6.22.12-desktop-1mdv, i586: installed
fglrx, 8.40.4-7mdv2008.0, 2.6.22.18-desktop-1mdv, i586: installed
unicorn, 0.9.3, 2.6.22.9-desktop-1mdv, i586: installed
unicorn, 0.9.3, 2.6.22.12-desktop-1mdv, i586: installed
unicorn, 0.9.3, 2.6.22.18-desktop-1mdv, i586: installed
hcfpcimodem, 1.13, 2.6.22.9-desktop-1mdv, i586: installed
hcfpcimodem, 1.13, 2.6.22.12-desktop-1mdv, i586: installed
hcfpcimodem, 1.13, 2.6.22.18-desktop-1mdv, i586: installed
virtualbox, 1.5.0-6mdv2008.0: added
dkms.conf: Error! No 'BUILT_MODULE_NAME' directive specified for record #0.
vboxadd, 1.5.0-6mdv2008.0, 2.6.22.9-desktop-1mdv, i586: installed (WARNING! Missing some built modules!)
vboxadd, 1.5.0-6mdv2008.0: added
dkms.conf: Error! No 'BUILT_MODULE_NAME' directive specified for record #0.
vboxadd, 1.5.0-6mdv2008.0, 2.6.22.12-desktop-1mdv, i586: installed (WARNING! Missing some built modules!)
nvidia96xx, 1.0-9639.4mdv2008.0: added
nvidia96xx, 1.0-9639.4mdv2008.0, 2.6.22.9-desktop-1mdv, i586: installed
nvidia96xx, 1.0-9639.4mdv2008.0: added
nvidia96xx, 1.0-9639.4mdv2008.0, 2.6.22.12-desktop-1mdv, i586: installed
nvidia96xx, 1.0-9639.4mdv2008.0, 2.6.22.18-desktop-1mdv, i586: installed
nvidia96xx, 1.0-9639.4mdv2008.0: added
madwifi, 0.9.3.2-3mdv2008.0: added
madwifi, 0.9.3.2-3mdv2008.0, 2.6.22.9-desktop-1mdv, i586: installed
madwifi, 0.9.3.2-3mdv2008.0: added
madwifi, 0.9.3.2-3mdv2008.0, 2.6.22.12-desktop-1mdv, i586: installed
madwifi, 0.9.3.2-3mdv2008.0, 2.6.22.18-desktop-1mdv, i586: installed
madwifi, 0.9.3.2-3mdv2008.0: added
slmodem, 2.9.11-0.20070813.2mdv2008.0, 2.6.22.9-desktop-1mdv, i586: installed
slmodem, 2.9.11-0.20070813.2mdv2008.0: added
slmodem, 2.9.11-0.20070813.2mdv2008.0, 2.6.22.12-desktop-1mdv, i586: installed
slmodem, 2.9.11-0.20070813.2mdv2008.0, 2.6.22.18-desktop-1mdv, i586: installed
slmodem, 2.9.11-0.20070813.2mdv2008.0: added
gspca, 1.00.20-1mdv2008.1, 2.6.22.12-desktop-1mdv, i586: installed
nvidia-current, 100.14.19-1mdv2008.0: added
nvidia-current, 100.14.19-1mdv2008.0, 2.6.22.9-desktop-1mdv, i586: installed
nvidia-current, 100.14.19-1mdv2008.0: added
nvidia-current, 100.14.19-1mdv2008.0, 2.6.22.12-desktop-1mdv, i586: installed
nvidia-current, 100.14.19-1mdv2008.0, 2.6.22.18-desktop-1mdv, i586: installed
nvidia-current, 100.14.19-1mdv2008.0: added
nvidia71xx, 1.0-7185.5mdv2008.0: added
nvidia71xx, 1.0-7185.5mdv2008.0, 2.6.22.9-desktop-1mdv, i586: installed
nvidia71xx, 1.0-7185.5mdv2008.0: added
nvidia71xx, 1.0-7185.5mdv2008.0, 2.6.22.12-desktop-1mdv, i586: installed
nvidia71xx, 1.0-7185.5mdv2008.0, 2.6.22.18-desktop-1mdv, i586: installed
nvidia71xx, 1.0-7185.5mdv2008.0: added

[root@Mustonen perhe]# uname -r
2.6.22.18-desktop-1mdv

[root@Mustonen perhe]# ls -l /etc/alternatives/gl_conf
lrwxrwxrwx 1 root root 34 2008-05-10 14:25 /etc/alternatives/gl_conf -> /etc/ld.so.conf.d/GL/standard.conf

Liite 1 Xorg.0.log
X Window System Version 1.3.0
Release Date: 19 April 2007
X Protocol Version 11, Revision 0, Release 1.3
Build Operating System: Linux_2.6.12-31mdksmp Mandriva
Current Operating System: Linux Mustonen 2.6.22.18-desktop-1mdv #1 SMP Mon Feb 11 13:53:50 EST 2008 i686
Build Date: 22 January 2008
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat May 10 14:23:43 2008
(==) Using config file: "/etc/X11/xorg.conf"
Data incomplete in file /etc/X11/xorg.conf
Undefined Device "aticonfig-Device[0]" referenced by Screen "aticonfig-Screen[0]".
(EE) Problem parsing the config file
(EE) Error parsing the config file

Fatal server error:
no screens found
(WW) xf86CloseConsole: KDSETMODE failed: Bad file descriptor
(WW) xf86CloseConsole: VT_GETMODE failed: Bad file descriptor

Liite 2 xorg.conf.
# File generated by XFdrake (rev 239302)


Section "Monitor"
Identifier "monitor1"
VendorName "Generic"
ModelName "1024x768 @ 60 Hz"
HorizSync 31.5-48.5
VertRefresh 50-70
ModeLine "768x576" 50.0 768 832 846 1000 576 590 595 630
ModeLine "768x576" 63.1 768 800 960 1024 576 578 590 616
EndSection

Section "Device"
Identifier "device1"
VendorName "ATI Technologies Inc"
BoardName "ATI Radeon 9250 and earlier"
Driver "ati"
Option "DPMS"
Option "XaaNoOffscreenPixmaps" "1"
EndSection

Section "Screen"
Identifier "screen1"
Device "device1"
Monitor "monitor1"
DefaultColorDepth 16

Subsection "Display"
Depth 8
Modes "1024x768" "832x624" "800x600" "640x480" "480x360" "320x240"
EndSubsection

Subsection "Display"
Depth 15
Modes "1024x768" "832x624" "800x600" "640x480" "480x360" "320x240"
EndSubsection

Subsection "Display"
Depth 16
Modes "1024x768" "832x624" "800x600" "640x480" "480x360" "320x240"
EndSubsection

Subsection "Display"
Depth 24
Modes "1024x768" "832x624" "800x600" "640x480" "480x360" "320x240"
EndSubsection
EndSection
# File generated by XFdrake (rev 239302)
# File generated by XFdrake (rev 230776)
# File generated by XFdrake (rev 230776)
# **********************************************************************
# Refer to the xorg.conf man page for details about the format of
# this file.
# **********************************************************************

Section "ServerLayout"
Identifier "layout1"
InputDevice "Keyboard1" "CoreKeyboard"
InputDevice "Mouse1" "CorePointer"
Screen "screen1"
EndSection

Section "Files"
EndSection

Section "Module"
Load "dbe" # Double-Buffering Extension
Load "v4l" # Video for Linux
Load "extmod"
Load "type1"
Load "freetype"
Load "glx" # 3D layer
Load "dri" # direct rendering
EndSection

Section "ServerFlags"
#DontZap # disable <Ctrl><Alt><BS> (server abort)

# allows the server to start up even if the mouse does not work
#DontZoom # disable <Ctrl><Alt><KP_+>/<KP_-> (resolution switching)
Option "allowmouseopenfail"
EndSection

Section "InputDevice"
Identifier "Keyboard1"
Driver "kbd"
Option "XkbModel" "pc105"
Option "XkbLayout" "fi"
Option "XkbOptions" "compose:rwin"
EndSection

Section "InputDevice"
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "ExplorerPS/2"
Option "Device" "/dev/mouse"
EndSection

Section "Extensions"
Option "Composite"
EndSection

[Anssi]

[jankky]

Homma rupes pelittää... Eli ny o kaks eri kuvil olevaa näyttöä.
Ny odotellaan mandriva 2009 version tuloa...

PS. Tiedon vuoksi:
[root@Mustonen perhe]# lspcidrake -v
intel_agp : Intel Corporation|82845G/GL[Brookdale-G]/GE/PE DRAM Controller/Host-Hub Interface [BRIDGE_HOST] (vendor:8086 device:2560 subv:1462 subd:5770)
shpchp : Intel Corporation|82845G/GL[Brookdale-G]/GE/PE Host-to-AGP Bridge [BRIDGE_PCI] (vendor:8086 device:2561)
uhci_hcd : Intel Corporation|82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 [SERIAL_USB] (vendor:8086 device:24c2 subv:1462 subd:5770)
uhci_hcd : Intel Corporation|82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 [SERIAL_USB] (vendor:8086 device:24c4 subv:1462 subd:5770)
uhci_hcd : Intel Corporation|82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 [SERIAL_USB] (vendor:8086 device:24c7 subv:1462 subd:5770)
ehci_hcd : Intel Corporation|82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller [SERIAL_USB] (vendor:8086 device:24cd subv:1462 subd:5770)
shpchp : Intel Corporation|82801 PCI Bridge [BRIDGE_PCI] (vendor:8086 device:244e)
iTCO_wdt : Intel Corporation|82801DB/DBL (ICH4/ICH4-L) LPC Interface Bridge [BRIDGE_ISA] (vendor:8086 device:24c0)
piix : Intel Corporation|82801DB (ICH4) IDE Controller [STORAGE_IDE] (vendor:8086 device:24cb subv:1462 subd:5770)
i2c_i801 : Intel Corporation|82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller [SERIAL_SMBUS] (vendor:8086 device:24c3 subv:1462 subd:5770)
snd_intel8x0 : Intel Corporation|82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller [MULTIMEDIA_AUDIO] (vendor:8086 device:24c5 subv:1462 subd:5770)
Card:ATI Radeon 9250 and earlier: ATI Technologies Inc|RV280 [Radeon 9200 SE] [DISPLAY_VGA] (vendor:1002 device:5964 subv:148c subd:2073)
8139too : Realtek Semiconductor Co., Ltd.|RTL-8139/8139C/8139C+ [NETWORK_ETHERNET] (vendor:10ec device:8139)
8139too : Realtek Semiconductor Co., Ltd.|RTL-8139/8139C/8139C+ [NETWORK_ETHERNET] (vendor:10ec device:8139 subv:1462 subd:577c)
ohci1394 : NEC Corporation|uPD72874 IEEE1394 OHCI 1.1 3-port PHY-Link Ctrlr [SERIAL_FIREWIRE] (vendor:1033 device:00f2 subv:1462 subd:577e)
hub : Linux 2.6.22.18-desktop-1mdv ehci_hcd|EHCI Host Controller [Hub|Unused|Full speed (or root) hub] (vendor:0000 device:0000)
hub : Linux 2.6.22.18-desktop-1mdv uhci_hcd|UHCI Host Controller [Hub|Unused|Full speed (or root) hub] (vendor:0000 device:0000)
hub : Linux 2.6.22.18-desktop-1mdv uhci_hcd|UHCI Host Controller [Hub|Unused|Full speed (or root) hub] (vendor:0000 device:0000)
hub : Linux 2.6.22.18-desktop-1mdv uhci_hcd|UHCI Host Controller [Hub|Unused|Full speed (or root) hub] (vendor:0000 device:0000)

[jankky]

tämä aihehan on jo kuollut, mutta sanottakoon että tänään tai eilen alkoi tuo catalyst ohjelma näkymään ylläpito paneelissa. Että näin aika on korjannut haavat.